HoB HOBLink, Administration Manual

Page: 52 / 83

Configuring HOBLink VPN Gateway HOBLink VPN Gateway
52 Security Solutions by HOB
This field is only shown when the UDP encapsulation value used is either
Always
or
On NAT detected
.
5.10 Users
In this section, users and user groups can be configured.
5.10.1 List of Users
Using this interface you can enter and manage the list of users that you wish to use
for this configuration.
Figure 32: List of Users
List of Users
The users of HOBLink VPN Gateway also need to be configured. A list of configured
users is displayed here.
The buttons below this list have the following functions:
Use the arrow buttons to manage the order in which the users appear in this list.
The entry fields for the
User interface are as follows:
Name – enter the name of the user you are adding to your network. This is a
required field.
Description – enter a description of the user to help identification and management
of the user.
click New to create a new entry in the list of users. You will then be
prompted to enter a name as an identifier for this new user.
click
Clone to clone the selected user. The clone must be given a new
name to avoid future conflicts.
click
Remove to remove the selected user from the list.