HoB HOBLink, Administration Manual

Page: 59 / 83

HOBLink VPN Gateway Configuring HOBLink VPN Gateway
Security Solutions by HOB 59
in a network. Select from 5 queues of priority from
1
(highest) to
5
(lowest), the
default priority is
1
.
5.12 VPN Gateway StatusInfo
As a VPN functions across a number of devices simultaneously, it is always
important to be able to check the status of the VPN on the various devices to make
sure that they are functioning properly. HOBLink VPN Gateway provides the status
information for this reason.
5.12.1 System Information
The status information for the complete system is displayed here.
Figure 37: System Information
The system information fields to be seen are as follows:
CPU

Name – the name of the CPU being used.

Manufacturer – the manufacturer of the CPU being used.
Operating System

Name – the name of the current operating system.

Version – the version number and release date of the current operating system.

Release – the release version of the current operating system.
Memory

Total – the total memory of the system.

Available – the current amount of memory that is available.
Network Interfaces – here the various interfaces for the VPN system are shown
with the IP address, subnet mask and MAC address of each interface. In the case
of Tun0, these values mean that the MAC address is not real as the interface is
virtual.
Click Refresh at the bottom of the screen to manually refresh or enable the
Automatically refresh checkbox to refresh at a set time interval.