HoB HOBLink, Administration Manual

Page: 26 / 83

Configuring the Kanji GUI Tool HOBLink VPN Gateway
26 Security Solutions by HOB
To configure HOBLink VPN Gateway using Kanji, it is necessary to specify the path
of the VPN configuration file and check the parameters used to create the Kanji
interface to ensure that it is running properly.
On this screen the data fields are as follows:
Base path - this shows the current location of the Kanji files used for this
configuration.
Define paths for Kanji and XML files - this link brings up the Settings screen
where the paths for Kanji and XML files are set. See Section 4.1 Defining Paths for
Kanji and XML files on page 26 for more information.
Select Kanji and XML filepath from Kanji configuration - click this link to bring
up the Kanji Filepath screen where you can specify the filepath. See Section 4.2
Selecting Kanji and XML Filepaths from the Kanji Configuration on page 27 for more
information.
Selected path - this field shows the current path for the Kanji and XML files. You
can have several paths to have several configuration filepaths. The default
configuration filepath is
/opt/HOB/HOBLinkVPN/
.
Kanji file - select from the dropdown box the Kanji configuration file (existing in the
selected path) to be used. The file used by default is
vpnconfig.knj
.
XML file - select from the dropdown box the XML configuration file (existing in the
selected path) to be used. The file used by default is
vpnconfig.xml
.
Set/View - click this button to save any edits and display the resulting edited
configuration.
4.1 Defining Paths for Kanji and XML files
This link brings up the Settings screen where the paths for Kanji and XML files is
set.
Figure 14: Kanji Settings