HoB HOBLink, Administration Manual

Page: 64 / 83

Configuring XML Parameters for HOBLink VPN Gateway HOBLink VPN Gateway
64 Security Solutions by HOB
6.5 Configuration Parameters for RADIUS
(
radius
)
It is possible that several groups of RADIUS servers exist, with different
configurations. For XML, every group of RADIUS servers is grouped in the node
radius-group
.
The RADIUS group contains a group of RADIUS servers used to authenticate peer
VPN users.
Source Port
src-port
This is only valid for types TCP
Port and UDP Port. It is a specified
source port and is valid if 'any-src-
port' = NO. The value should be in
the range 1-65535
Allow ANY Destination
Port
any-port
This is only valid for types TCP
Port and UDP Port. Check if a
destination port has been specified
(YES/NO), default is 'NO'
Destination Port
Number
port
This is only valid for types TCP
Port and UDP Port. It is a specified
destination port number and is
valid if 'any-port' = NO. The value
should be in the range 1-65535
Protocol Number
protocol-number
This is only valid for type
PROTOCOL, enter a decimal IP
protocol number
Parameters XML Name Description
Group Name
name
This is the unique name of the
group of RADIUS servers
Corresponding LDAP
service
corresponding-
LDAP-service
This is the LDAP group used to
obtain user configuration from a
LDAP server (for example, it takes
the Virtual IP for a user). The
LDAP group name is defined in the
LDAP configuration (ldap\LDAP-
service\name). This functionality is
not implemented yet, but it is
possible to select it in the
configuration