HoB HOBLink, Administration Manual

Page: 39 / 83

HOBLink VPN Gateway Configuring HOBLink VPN Gateway
Security Solutions by HOB 39
LDAP Entry
Here you can add LDAP servers to the selected LDAP service and configure them.
The buttons below this list have the following functions:
Use the arrow buttons to manage the order in which the LDAP entries appear in this
list. The entry fields for the
LDAP Entry part of this interface are as follows:
Name – enter the name of the LDAP server you are adding to your network. This is
a required field.
Comment – enter a comment to help you in identifying and managing the LDAP
server.
Server IP address – enter the IP address of the LDAP server.
Server port – enter the LDAP port number of the server.
Connection waiting duration – specify a limit (in seconds) for an LDAP server to
respond before the connection attempt moves to the next server in the service. The
default is
5
.
Search nested groups (depth level) – enter here the depth to which any searches
are to be performed. The default is
1
.
Global directory – enable to allow the use of the global directory of your system by
this LDAP server.
Base DN – enter the Base DN (Distinguished Name) for the LDAP server.
Search timeout(s) – the timeout length for a search of the LDAP to be performed,
in seconds. The default is
5
seconds.
Retry after error(s) – the amount of time in seconds that a connection attempt must
wait to be made again after a failed attempt. The default is
5
seconds.
Search result buffer size – the maximum amount of data that will be returned from
the LDAP server following a successful search. The allowed range of entries is
1024
-
65535
, the default is
1024
.
Maximum sessions – the maximum number of concurrent connections that can be
made. The default is
1
.
DN – the DN to be used for this element of the LDAP.
Password – enter the password to be used for this LDAP element. Click Show to
show the password so that it can be read for confirmation purposes.
LDAP template – select the LDAP template to be used for this server. For more
information on the LDAP template, see the next section.
click New to create a new entry in the list of LDAP servers of the selected
LDAP service. You will then be prompted to enter a name as an identifier
for this new server.
click
Clone to clone an existing server. The clone must be given a new
name to avoid future conflicts.
click
Remove to remove the selected server from the list.