![HNF-NICOLAI UD3 Adventure Manual Download Page 85](http://html.mh-extra.com/html/hnf-nicolai/ud3-adventure/ud3-adventure_manual_2142022085.webp)
85
3.2. Stem adjust
Your vehicle is equipped with an angle-adjustable stem. By adjusting the angle of the
stem, the height of the handlebars can be raised or lowered.
•
Loosen 4 screws until stem angle can be tur
-
ned
•
Set new handlebar angle
•
Tighten bolts with appropriate torque. Obser
-
ve the information on the stem or in the table
in section 9
In a second step, the handlebar must be rotated by this angle in the opposite direc
-
tion. To do this:
•
Loosen all 4 screws on the clamping plate of the stem until the handlebar can
be turned.
•
Turn the handlebars to the desired position
•
Tighten all 4 handlebar clamping screws of the stem with the appropriate torque.
3.3. Brake lever
3.3.1.
Adjusting the brake lever position
To hold the handlebar securely while braking, it is
best to only grip the brake levers with your index
and middle fingers.
To achieve this position, you may need to move
the lever sideways so that both fingers can grip the
brake lever as shown in the photo.
By loosening the two T25 screws on the handlebar clamp, the brake lever on the
handlebar can be moved. You may also first have to loosen and move the Bosch
control unit with a suitable Allen key.
Summary of Contents for UD3 Adventure
