Hitachi SJ-DN2, Instruction Manual

Page: 48 / 55

APPENDIX PARAMETER OBJECT LISTS
44
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com
mand
AlarmRerayOutput (Param236) 1 126 1 Same above 1 Get/Set C026
FM Mode Select (Param237) 1 127 1
00(Output Frequency)/
01(Output Current)/
02(Output Torque)/
03(Digital Outp-frq)/
04(Output Voltage)/
05(Input Power)/
06(Therm Load Rate)/
07LAD frequency)/
08(Digital Current Monitoring)/
09(Motor Temperature)/
10(Heat Sink Temperature)/
12(General-purpose Output YA0)
1 Get/Set C027
AM Mode Select (Param238) 1 128 1
00(Output Frequency)/
01(Output Current)/
02(Output Torque)/
04(Output Voltage)/
05(Input Power)/
06(Therm Load Rate)/
07(LAD frequency)/09(Motor
Temperature)/10(Heat Sink
Temperature)/11(Output Torque
[signed value])/13(General-purpose
Output YA1)
1 Get/Set C028
AMI Mode Select (Param239) 1 129 1
00(Output Frequency)/
01(Output Current)/
02(Output Torque)/
04(Output Voltage)/
05(Input Power)/
06(Therm Load Rate)/
07(LAD frequency)/09(Motor
Temperature)/10(Heat Sink
Temperature)/14(General-purpose
Output YA2)
1 Get/Set C029
Digital current monitor reference
value (Param438)
1 130 2 20.0 to 200.0 (%) 10 Get/Set C030
Dig Out11 NO/NC (Param240) 1 131 1 00(NO)/01(NC) 1 Get/Set C031
Dig Out12 NO/NC (Param241) 1 132 1 00(NO)/01(NC) 1 Get/Set C032
Dig Out13 NO/NC (Param242) 1 133 1 00(NO)/01(NC) 1 Get/Set C033
Dig Out14 NO/NC (Param243) 1 134 1 00(NO)/01(NC) 1 Get/Set C034
Dig Out15 NO/NC (Param244) 1 135 1 00(NO)/01(NC) 1 Get/Set C035
AlarmReray NO/NC (Param245) 1 136 1 00(NO)/01(NC) 1 Get/Set C036
Low-current indication signal
output mode selection
(Param439)
1 138 1
00 (output during
acceleration/deceleration and
constant-speed operation)/
01 (output only during
constant-speed operation)
1 Get/Set C038
Low-current indication signal
detection level (Param440)
1 139 2
0.0 to 200.0(%) (~55KW)
0.0 to 180.0(%) (75~132KW)
10 Get/Set C039
OLAlarmSignalSel (Param246) 1 140 1 00(Valid)/01(Valid at const) 1 Get/Set C040
OL Alarm Level 1 (Param247) 1 141 2
0 to 200(%) (~55KW)
0 to 180(%) (75~132KW)
(constant current 1%)
1 Get/Set C041
ArrivalFreq Acc1 (Param248) 1 142 4 0.00 to 400.00(Hz) 100 Get/Set C042
ArrivalFreq Dec1(Param249) 1 143 4 0.00 to 400.00(Hz) 100 Get/Set C043
PID DeviationLvl (Param250) 1 144 2 0.0 to 100.0(%) 10 Get/Set C044
ArrivalFreq Acc2 (Param251) 1 145 4 0.00 to 400.00(Hz) 100 Get/Set C045
ArrivalFreq Dec2 (Param252) 1 146 4 0.00 to 400.00(Hz) 100 Get/Set C046
Max PID feedback data
(Param441)
1 152 2 0.0 to 100.0(%) 10 Get/Set C052
Min PID feedback data
(Param442)
1 153 2 0.0 to 100.0(%) 10 Get/Set C053
OV-TRQ FW-V (Param253) 1 155 1
0 to 200(%) (~55KW)
0 to 180(%) (75~132KW)
(constant current 1%)
1 Get/Set C055
OV-TRQ RV-R (Param254) 1 156 1
0 to 200(%) (~55KW)
0 to 180(%) (75~132KW)
(constant current 1%)
1 Get/Set C056
OV-TRQ RV-V (Param255) 1 157 1
0 to 200(%) (~55KW)
0 to 180(%) (75~132KW)
(constant current 1%)
1 Get/Set C057