Hitachi SJ-DN2, Instruction Manual

Page: 43 / 55

APPENDIX PARAMETER OBJECT LISTS
39
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com-
mand
OI StartMode Sel (Param136) 1 105 1 00(Set Frequency)/01(0Hz) 1 Get/Set A105
O2 StartFreq Set (Param137) 1 111 4 -400.00 to 400.00(Hz) 100 Get/Set A111
O2 End Freq Set (Param138) 1 112 4 -400.00 to 400.00(Hz) 100 Get/Set A112
O2 Start Rate (Param139) 1 113 1 -100 to “O2 End Rate” (%) 1 Get/Set A113
O2 End Rate (Param140) 1 114 1 “O2 Start Rate” to 100(%) 1 Get/Set A114
AccCurveSwelling (Param141) 1 131 1
01(small swelling) to
10(large swelling)
1 Get/Set A131
DecCurveSwelling (Param142) 1 132 1
01(small swelling) to
10(large swelling)
1 Get/Set A132
Operation-target frequency
selection 1 (Param400)
1 141 1
00(Digital Operator)/
01(Keypad Potentiometer)/
02(Input via O)/
03(Input via OI)/
04(External Communication)/
05(Option1)/06(Option 2)/
07(Pulse-String Frequency input)
1 Get/Set A141
Operation-target frequency
selection 2 (Param401)
1 142 1
00(Digital Operator)/
01(Keypad Potentiometer)/
02(Input via O)/
03(Input via OI)/
04(External Communication)/
05(Option 1)/06(Option 2)/
07(Pulse-String Frequency Input)
1 Get/Set A142
Operator selection (Param402) 1 143 1
00(Addition
：
A141+A142)/
01(Subtraction
：
A141-A142)/
02(Multiplication
：
A141
×
A142)
1 Get/Set A143
Frequency to be added
(Param403)
1 145 4
0.00 to 400.00(Hz)
1 Get/Set A145
Sign of the frequency to be
added (Param404)
1 146 1
00(Forward)/01(Reverse)
1 Get/Set A146
EL-S curve
acceleration/deceleration ratio 1
(Param405)
1 150 1
0 to 50(%)
1 Get/Set A150
EL-S curve
acceleration/deceleration ratio 2
(Param406)
1 151 1
0 to 50(%)
1 Get/Set A151
EL-S curve
deceleration/deceleration ratio 1
(Param407)
1 152 1
0 to 50(%)
1 Get/Set A152
EL-S curve
deceleration/deceleration ratio 2
(Param408)
1 153 1
0 to 50(%)
1 Get/Set A153
Support service
Service name Code
Get_Attribute_Single H’0E
Set_Attribute_Single H’10
(3) Extend Group B object Class ID=103
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com
mand
Restart Mode Sel (Param143) 1 101 1
00(Trip)/01(0Hz Start)/
02(Synchronize)/
03(Sync& Stop& Trip)/
04(Restarting with active Matching
Frequency)
1 Get/Set b001
Allowable UVTime (Param144) 1 102 1 0.3 to 25.0(s) 10 Get/Set b002
Restart WaitTime (Param145) 1 103 2 0.3 to 100.0(s) 10 Get/Set b003
IP/UVTrip AtStop (Param146) 1 104 1
00(Invalid)/01(Valid)/
02(Invalid on stop)
1 Get/Set b004
IP/UVRestartTime(Param147) 1 105 1 00(16 times)/01(Free) 1 Get/Set b005
Open-phaseSelect (Param148) 1 106 1 00(Invalid)/01(Valid) 1 Get/Set b006
FreqSet To Match (Param149) 1 107 4 0.00 to 400.00(Hz) 100 Get/Set b007