Hitachi SJ-DN2, Instruction Manual

Page: 49 / 55

APPENDIX PARAMETER OBJECT LISTS
45
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com
mand
OV-TRQ FW-R (Param256) 1 158 1
0 to 200(%) (~55KW)
0 to 180(%) (75~132KW)
(constant current 1%)
1 Get/Set C058
Thermal Warn Lvl (Param257) 1 161 2 0 to 100(%) 1 Get/Set C061
AlarmMode Select (Param258) 1 162 1 00(Invalid)/01(3bit)/02(4bit) 1 Get/Set C062
ZERO Speed Level (Param259) 1 163 2 0.00 to 100.00(Hz) 100 Get/Set C063
CommSpeed Select (Param260) 1 171 1
02(loop back)/
03(2400bps)/04(4800bps)/
05(9600bps)/06(19200bps)
1 Get/Set C071
Comm ID Select (Param261) 1 172 1 1 to 32 1 Get/Set C072
CommBitLengthSel (Param262) 1 173 1 7(7bit)/8(8bit) 1 Get/Set C073
CommParitySelect (Param263) 1 174 1
00(No Parity)/01(Even Parity)/
02(Odd Parity)
1 Get/Set C074
Comm StopBit Sel (Param264) 1 175 1 1(1bit)/2(2bit) 1 Get/Set C075
Communication timeout limit
before tripping (Param443)
1 177 2 0.00 to 99.99(s) 100 Get/Set C077
Comm Wait Time (Param265) 1 178 2 0 to 1000(ms) 1 Get/Set C078
Communication mode selection
(Param444)
1 179 1 00(ASCII)/01(Modbus-RTU) 1 Get/Set C079
O Adjustment (Param266) 1 181 2 0 to 65535 1 Get/Set C081
OI Adjustment (Param267) 1 182 2 0 to 65535 1 Get/Set C082
O2 Adjustment (Param268) 1 183 2 0 to 65535 1 Get/Set C083
Therm-Adjustment (Param269) 1 185 2 0.0 to 1000.0 10 Get/Set C085
Support service
Service name Code
Get_Attribute_Single H’0E
Set_Attribute_Single H’10
(6) Extend Group C object Class ID=106
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com-
mand
UP/DWN Selection (Param270) 1 101 1 00(Not keep)/01(Keep) 1 Get/Set C101
Reset Selection (Param271) 1 102 1
00(Reset at close)/
01(Reset at open)/
02(Only trip clear)/03(Only Trip
Reset)
1 Get/Set C102
Reset f MacthSel (Param272) 1 103 1
00(0Hz start)/
01(Synchronize)/02(Restarting with
Active Matching Frequency)
1 Get/Set C103
FM gain adjustment (Param446)
1 105 2
50 to 200(%)
1 Get/Set C105
AM gain adjustment (Param447)
1 106 2
50 to 200(%)
1 Get/Set C106
AMI gain adjustment (Param448)
1 107 2
50 to 200(%)
1 Get/Set C107
AM bias adjustment (Param449)
1 109 1
0 to 100(%)
1 Get/Set C109
AMI bias adjustment (Param450)
1 110 1
0 to 100(%)
1 Get/Set C110
OL Alarm Level 2 (Param273) 1 111 2
0 to 200(%) (~55KW)
0 to 180(%) (75~132KW)
(constant current 1%)
1 Get/Set C111
O Zero Adjustment (Param274) 1 121 2 0 to 65535 1 Get/Set C121
OI Zero Adjustment (Param275) 1 122 2 0 to 65535 1 Get/Set C122
O2 Zero Adjustment (Param276) 1 123 2 0 to 65535 1 Get/Set C123
Output 11 on-delay time
(Param451)
1 130 2
0.0 to 100.0(s) 10
Get/Set C130
Output 11 off-delay time
(Param452)
1 131 2
0.0 to 100.0(s) 10
Get/Set C131
Output 12 on-delay time
(Param453)
1 132 2
0.0 to 100.0(s) 10
Get/Set C132
Output 12 off-delay time
(Param454)
1 133 2
0.0 to 100.0(s) 10
Get/Set C133
Output 13 on-delay time
(Param455)
1 134 2
0.0 to 100.0(s) 10
Get/Set C134
Output 13 off-delay time
(Param456)
1 135 2
0.0 to 100.0(s) 10
Get/Set C135