Hitachi PXR, Service Manual

Page: 102 / 231

4-12
5 Remove the fixing screws (2 positions) of the solenoid valve.
"Caution": Put wiping paper under the solenoid valve to provide for an ink
drip.
6 Clean the portion stained with ink and then install a solenoid valve by
reversing the above procedure.
"Caution" Set the O-ring in the groove of the solenoid valve securely.
Take care not to cause the O-ring to fall off or bite.
7 Reset the time of the corresponding solenoid to 0 on the “Parts usage time
management” screen.
Fixing screw
Solenoid valve
O-ring S16
O-ring 4.7
O-ring mounting groove
Incre-
ment
Decre-
ment
Cancel
changes
Reset
Back
0 9 8 7 6 5 4 3 2 1
Status: XXXXXXXXXXX
2005.07.07 12:45
Parts usage time
Ink filter [ 0 0 0 0 0 ]
Circulation f. [ 0 0 0 0 0 ]
Makeup ink f. [ 0 0 0 0 0 ]
Air filter [ 0 0 0 0 0 ]
Pump [ 0 0 0 0 0 ]
Recovery filter [ 0 0 0 0 0 ]
Heating unit [ 0 0 0 0 0 ]
MV1 [ 0 0 0 0 0 ]
(hours)
MV2 [ 0 0 0 0 0 ]
MV3 [ 0 0 0 0 0 ]
MV4 [ 0 0 0 0 0 ]
MV5 [ 0 0 0 0 0 ]
MV6 [ 0 0 0 0 0 ]
MV7 [ 0 0 0 0 0 ]
MV8 [ 0 0 0 0 0 ]
MV9 [ 0 0 0 0 0 ]
(hours)
Update log 2005.07.07 12:45
<Consumption>
I
nk [ 0 0 0 0 0 0 ] (ml)
Makeup ink [ 0 0 0 0 0 0 ] (ml)
Print count 0 0 0 0 0 0 0 0 0