Hitachi HF-W6500 45/40 Feature Manual Download Page 32

Page: 32 / 163

2. ITEMS MONITORED BY THE RAS FEATURE

2-11

2.8 RAID Monitoring

[D Model only]

D Model has a RAID1 feature (hereinafter denoted simply as “RAID”) generally known as

“mirror disk (mirroring)”.

The RAID monitoring function monitors the status of the RAID on this equipment. If there is

any change in the status of the RAID, this function notifies a user or an application using the

following methods.

(1) Hardware status window

(2) Event notification

(3) Popup notification

(4) Outputs on the status display digital LEDs

(5) Remote notification

(6) Alarm lamp

(7) The hfwDiskStat, hfwRaidStat, and RaidStat functions in the RAS library

(8) RAID configuration control command (raidctrl)

For information about items (1) through (5), see “CHAPTER 4 CHECKING THE

HARDWARE STATUS”.

For information about item (7), see “6.1.9 Get function for the drive condition

(hfwDiskStat)”, “6.1.10 Get function for the RAID status (hfwRaidStat, RaidStat) [D Model

only]”. For information about item (8), see “5.3 RAID Configuration Control Command

(raidctrl) [D Model only]”.

If you use the MCALL contact of the RAS external contact interface, the external hardware

connected to the RAS external contact interface can detect malfunctions of this equipment.

The following table shows how the state of the MCALL contact changes.

Table 2-5 Status of the RAID and State of the MCALL Contact

RAID status

MCALL contact

Normal

Open

Degraded, Unknown, Fail

Closed

The alarm indicator (as well as the MCALL contact of the RAS external contact interface) is

not dedicated just to monitoring the status of the RAID. Therefore, it will not be turned off

(opened) when the status of the RAID recovers as long as malfunctions are detected in other

monitored items.

Summary of Contents for HF-W6500 45/40




































































































































































Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands

Hitachi HF-W6500 45/40, Feature Manual

Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands