Hitachi HF-W6500 45/40 Feature Manual Download Page 99

Page: 99 / 163

5. CONTROLLING THE HARDWARE

5-8

(3) Switching whether a media error is notified when it occurs (with the /NOTIFY option)

If you execute the raidctrl command with the /NOTIFY option, you can switch whether

media errors are notified when they occur.

You need to have administrator privileges to specify ON or OFF for this option and

change the media error notification setting. Log on to the computer using an

administrator account and then execute the command. If you do not have administrator

privileges when you run the command, an error message is displayed and the command

exits.

If User Account Control (UAC) is enabled, start the command prompt as an

administrator according to “APPENDIX A RUNNING COMMAND PROMPT AS

AN ADMINISTRATOR”, and then execute the raidctrl command. If the /NOTIFY

option is specified alone, the current notification setting is displayed.

The following are examples of executing the command with the /NOTIFY option.

• To check the media error notification setting: raidctrl /NOTIFY

C:\ >raidctrl /NOTIFY
MEDIA ERROR Notify Setting:ON
C:\ >

• To enable media error notification: raidctrl /NOTIFY ON

• To disable media error notification: raidctrl /NOTIFY OFF

Summary of Contents for HF-W6500 45/40




































































































































































Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands

Hitachi HF-W6500 45/40, Feature Manual

Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands