Hitachi HF-W6500 45/40 Feature Manual Download Page 127

Page: 127 / 163

6. LIBRARY FUNCTIONS

6-22

Note that if multiple conditions exist at the same time, the logical sum of the values shown in

Table 6-9 is stored.

・

If drive failure prediction (SMART) is detected and the drive power-on (=used) hours

exceeded the threshold at the same time:

DISKSTAT_SMART | DISKSTAT_OVERRUN (0x48) is stored.

If this function completes successfully, the function returns TRUE. If this function terminates

with an error, the function returns FALSE. When this function terminates with an error, the

value stored in phfwDiskStatus is invalid.

When this function terminates with an error, call the GetLastError Windows API function to get

the error code. Error codes returned by this function on its own are as follows.

Error code (value)

Description

HFWRAS_INVALID_PARAMETER
(0x20000001)

There is an error in the specified parameters.

HFWRAS_NOT_INITIALIZE
(0x20000002)

Startup of the RAS software has not completed yet.

HFWRAS_INTERNAL_ERROR
(0x20000003)

An internal error has been generated.

Other error codes come from the Windows API functions used by this function. For details

about those error codes, refer to the Windows API help.

We provide a sample program that uses this function in C. For information about the name of

the sample program and where you can find it, see “6.2 Sample Programs”.

Summary of Contents for HF-W6500 45/40




































































































































































Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands

Hitachi HF-W6500 45/40, Feature Manual

Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands