Hitachi HF-W6500 45/40 Feature Manual Download Page 129

Page: 129 / 163

6. LIBRARY FUNCTIONS

6-24

Level stores the RAID level. The meaning of each value that can be stored in Level is as

follows.

Table 6-10 Values Stored in Level in the ARRAY_STATUS Structure

No.

Defined value

Description

HFW_RAID1 (0x00000001)

RAID 1 is set up.

DiskNumber stores the value that indicates the drive bays used by the RAID. The stored

value is a logical sum of some of the following.

Table 6-11 Values Stored in DiskNumber in the ARRAY_STATUS Structure

No.

Defined value

Description

HFW_DISK1 (0x00000001)

Drive bay1 is used by the RAID.

HFW_DISK2 (0x00000002)

Drive bay2 is used by the RAID.

Status stores the value that indicates the RAID status. The stored value is a logical sum of

some of the following. Numbers.1 through 4 denote RAID statuses, and numbers 5 and 6

denote detailed information.

Table 6-12 Values Stored in Status in the ARRAY_STATUS Structure

No.

Defined value

Description

HFW_RAID_OPTIMAL
(0x00000001)

The RAID is working properly.

HFW_RAID_DEGRADE
(0x00000004)

The RAID is degenerated.

HFW_RAID_UNKNOWN
(0x00000008)

The RAID status is unknown.

HFW_RAID_FAIL
(0x00000010)

The RAID failed.

HFW_RAID_REBUILD
(0x00010000)

One of the drives is under the rebuild process.

HFW_RAID_MEDIA_ERROR
(0x00020000)

A media error has occurred.

For example, while the rebuild process is ongoing, the RAID status is Degraded

(HFW_RAID_DEGRADE) and the detailed information is Rebuild

(HFW_RAID_REBUILD). Therefore, the logical sum of those two

(HFW_RAID_DEGRADE| HFW_RAID_REBUILD) is stored in Status.

Summary of Contents for HF-W6500 45/40




































































































































































Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands

Hitachi HF-W6500 45/40, Feature Manual

Search results

Summary of Contents for HF-W6500 45/40

Reviews:

Related manuals for HF-W6500 45/40

Brands by name

Popular brands