Hitachi DV-RV8500E, Service Manual

Page: 37 / 91

4 - 1
Disassembly and Reassembly
4-1 Order of Disassembly
Refer to the Disassembly Flowchart in Fig. 4-1-1 for the order of removing components. When
reassembling components, use the reverse order to removal unless otherwise specified.
Reading Disassembly Flowchart:
After locating the target component in the flowchart, remove all components of the target in
sequence, following the arrows (routes) from the top of flowchart. If multiple routes exist to the
target component from the top of flowchart, remove all the components on all the routes.
4
Fig. 4-1-1 Disassembly Flowchart
4-2 Cabinet Disassembly
Information:
Numbers in figures are step numbers in disassembly procedure, and letters in brackets [ ] show the
types of screw.
(1) Top Cover
1) Remove the seven screws [A].
2) Slightly open both ends on the front side of top cover and lift the top cover in the direction of the
arrow.
Fig. 4-2-1 Top cover
TIMER P.C.B 4-2 (6)
JACK P.C.B, KEY P.C.B 4-2 (9)
VCR P.C.B 4-2 (7)
Top cover
Parts to remove Item
4-2 (1) FAN motor 4-2 (3)
Front panel 4-2 (2)
SMPS P.C.B 4-2 (4)
Deck mechanism 4-2 (5)
DVD Multi drive 4-2 (8)
VDR P.C.B 4-2 (9)
Parts to remove Item Parts to remove Item
1) Screw [A]
2)
1) Screw [A]
1) Screw [A]
[A] M3X8 [Black]
Top Cover