Hitachi DV-RV8500E Service Manual Download

Page: 17 / 91

2 - 10

General Description > Names of Parts

Remote Control Overview

POWER

Switches the recorder ON or OFF.

DVD

Select the Recorder’s function mode to

DVD.

VCR

Select the Recorder’s function mode to

VCR.

INPUT

Changes the input to use for recording

(Tuner, AV1-3, or DV IN).

0-9 numerical buttons

Selects numbered options in a menu.

CLEAR

- Removes a track number on the

Program List or a mark on the

Marker Search menu.

- Reset tape counter to zero.

DISPLAY

Accesses On-Screen Display.

TIME SLIP

To play the title being recorded and also

currently being recorded appears as

PIP.

TIMER REC

Displays Timer Record menu.

REC (

)

Starts recording. Press repeatedly to set

the recording time.

REC MODE

Selects the recording mode:

XP, SP, LP, or EP.

MANUAL SKIP

Pressing this button during palyback will

skip to a scene 30 seconds forward.

TV/DVD

To view channels selected by the

recorder’s tuner or by the TV tuner.

CHP ADD

Inserts a chapter marker when playing/

recording a VR mode DVD-RW (and

DVD+RW/+R) disc.

VIDEO Plus +

Pressing this button and input VIDEO

Plus + number to preset the timer for

recording.

DUBBING

Press to copy DVD to VCR (or VCR to

DVD).

AUDIO

Selects an audio language (DVD) or an

audio channel (CD).

SUBTITLE

Selects a subtitle language.

ANGLE

Selects a DVD camera angle,

if available.

ZOOM

Enlarges DVD video image.

MARKER

Marks any point during playback.

SEARCH

Displays Marker Search menu.

EJECT, OPEN/CLOSE

- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.

TV Control Buttons

POWER:

Turns the TV on or off.

INPUT:

Selects the TV’s source.

PROG:

Selects TV’s channel.

VOL:

Adjusts TV’s volume.

MUTE:

Temporarily turns TV sound

OFF, press again to restore.

BACKWARD / FORWARD (

)

- DVD: Search backward or forward.
- VCR: Rewinds the tape during the
STOP mode, for fast reverse picture
search and Advances the tape during
the STOP mode, fast forward picture
search.

SKIP (

)

Go to next chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.

PAUSE/STEP (

)

Pause playback temporarily / press
repeatedly for frame-by-frame
playback.

PLAY (

)

Starts playback.

STOP (

)

Stops playback or recording.

DISC MENU / LIST

Accesses menu on a DVD disc, Title List
or Playlist menu.

(left/right/up/down)

Selects an option in the menu.

PROG/TRK(+/–)

- Select channel program of the
recorder.
- To adjust tracking.
- To control vertical tremble during

picture still.

ENTER

- Acknowledges menu selection.
- Displays information while viewing a
TV program.

SETUP

Accesses or removes the Setup menu.

TITLE MENU

Displays the disc’s Title menu, if
available.

RETURN (

)

- Removes the menu.
- Displays the menu of a video CD

with PBC.

REPEAT

Repeat chapter, track, title, all.

A-B

Repeat sequence.

RANDOM

Plays tracks in random order.

THUMBNAIL

Selects a thumbnail picture for the
current title and chapter for use in the
Original and Playlist menu.

Summary of Contents for DV-RV8500E




























































































Search results

Summary of Contents for DV-RV8500E

Reviews:

Related manuals for DV-RV8500E

Brands by name

Popular brands

Hitachi DV-RV8500E, Service Manual

Search results

Summary of Contents for DV-RV8500E

Reviews:

Related manuals for DV-RV8500E

Brands by name

Popular brands