Hitachi DV-RV8500E, Service Manual

Page: 51 / 91

4 - 15
(Fig.A-7-2)
Cam Gear
(W2)
Sector Gear
(Fig.A-7-3)
Washer
Capstan Brake Ass'y
(Fig.A-7-4)
Slider Plate
(Fig.A-7-5)
Brake Lever
(Fig.A-7-8)
Tension Lever
(Fig.A-7-6)
Spring Lever
(Fig.A-7-7)
Loading Base
Chassis
(H10)
(L2)
(H11)
(B)
(A)
Hole (B) in Cam Gear
Hole (A) in Drive Gear
Hole (C) in Can Gear
Drive Gear
(Fig.A-7-1)
Disassembly and Reassembly > Deck Mechanism Disassembly
(23) Driver gear (Fig. A-7-1) and
cam gear (Fig. A-7-2)
1) Remove washer (W2), and then lift the drive
gear.
2) Release hook (H10) of the cam gear shaft,
and then lift the cam gear.
Note:
Align these positions of gears during
reassembly:
1) Align hole (A) in drive gear and hole (B) in
cam gear.
2) Align hole (C) in cam gear and the hole in
chassis.
(24) Sector gear (Fig. A-7-3)
1) Release hook (H11) of sector gear, and then
lift the sector gear.
(25) Capstan brake assembly (Fig. A-7-4)
1) Release lock tab (L2) from the surface of
chassis, and then lift the capstan brake.
Fig. A-7 Drive Gear, Cam Gear, Sector Gear, Capstan Brake Ass'y, Slider Plate,
Tension Lever, Spring Lever, Brake Lever
(26) Slider plate (Fig. A-7-5)
1) Release the engagement with chassis, and
then lift the slider plate.
(27) Tension lever (Fig. A-7-6)
1) Turn the tension lever counterclockwise to
release it from guide (A) of chassis.
(28) Spring lever (Fig. A-7-7)
1) Turn the spring lever in the direction of the
arrow to release portion (B) from the guide
of chassis.
(29) Brake lever (Fig. A-7-8)
1) Lift the brake lever.
Note:
When reinstalling the sector gear and slider
plate, perform the position alignment shown in
the figure on next page.