4 - 13
Disassembly and Reassembly > Deck Mechanism Disassembly
(15) P4 base assembly (Fig. A-5-1)
1) Release portion (A) of the P4 base assembly
from the boss of chassis.
2) Turn the P4 base assembly in the direction
of the arrow to release its engagement with
chassis.
(16) Lid opener (Fig. A-5-2)
1) Release portion (B) of the lid opener from
the boss of chassis.
2) Turn the lid opener in the direction of the
arrow to release its engagement with
chassis.
(17) Pressure arm assembly (Fig. A-5-3)
1) Lift the pressure arm assembly.
Fig. A-5 P4 Base Ass'y, Lid Opener, Pressure Arm Ass'y, Take-up Arm
P4 Base Ass'y
(Fig.A-5-1)
(A)
(D)
(H9)
Lid Opener
(Fig.A-5-2)
Pressure Arm Ass'y
(Fig.A-5-3)
Take-up Arm
(Fig.A-5-4)
Chassis
(C)
(B)
Cam Gear
BOSS (Take-up Arm)
BOSS (Pressure Arm Ass'y)
Note:
A spring is attached between the pressure arm
assembly and chassis: Take care not to lose it.
When reinstalling the pressure arm assembly,
make sure that you insert the boss at portion
(C) of pressure arm assembly into the slit in
cam gear at the back of chassis.
(18) Take-up arm (Fig. A-5-4)
1) Lift the take-up arm to release it from hook
(H9) of chassis.
Note:
When reinstalling the take-up arm, make sure
that you insert the boss at portion (D) of take-
up arm into the slit in cam gear at the back of
chassis.
Summary of Contents for DV-RV8500E
Page 70: ...THE UPDATED PARTS LIST FOR THIS MODEL IS AVAILABLE ON ESTA ...
Page 82: ...LOCATION GUIDE C 1 C Circuit Board Diagrams C 1 VCR Circuit Board Diagram COMPONENT SIDE ...
Page 83: ...LOCATION GUIDE C 2 CONDUCTOR SIDE ...
Page 84: ...LOCATION GUIDE CONDUCTOR SIDE C 3 C 2 S M P S Circuit Board Diagram ...