Hitachi DV-RV8500E, Service Manual

Page: 21 / 91

3 - 1
L/D MOTOR Ass'y
(A)
D37 Clutch Ass'y
(B)
Details of Servicing and Troubleshooting
3
3-1 Details of Servicing
3-1-1 Removing Disc from Faulty Recorder
If disc cannot be removed due to fault, disassemble the recorder and remove the disc by the
following procedure:
1) Remove the top cover.
[See 4-2 (1) for removal procedure.]
2) Remove the front panel.
[See 4-2 (2) for removal procedure.]
3) Push the white component portion under the
disc tray strongly, and the tray will come
slightly forward.
Remove the disc tray in the direction of arrow
B. Perform this work carefully, making sure
that the disc is not scratched.
Fig. 3-1-1 Removing Disc
"A" PUSH
"B"
DISC TRAY
3-1-2 Removing Video Cassette from Faulty Recorder
If video cassette cannot be removed due to fault, disassemble the recorder and remove the video
cassette by the following procedure:
1) Remove the top cover. [See 4-2 (1) for removal procedure.]
2) Remove the front panel. [See 4-2 (2) for removal procedure.]
3) Remove the deck mechanism. [See 4-2 (5) for removal procedure.]
4) Turn the worm gear of L/D motor assembly in the direction of arrow A: Unloading will start.
When the tape starts to slacken, turn the D37 clutch assembly on the front of deck mechanism in
the direction of arrow B to remove the slack tape.
5) When unloading is complete, the deck mechanism will begin EJECT operation: Completely turn
the worm gear of L/D motor assembly in the direction of arrow A.
Fig. 3-1-2 Removing Video Cassette