5
English
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed on page 150.
Standard accessories are subject to change without
notice.
APPLICATIONS
○
Power Supply for Hitachi Cordless Power Tools (DC 36 V)
○
Power Supply for USB-Connection Equipment (DC 5 V)
SPECIFICATIONS
Table 1
Model
BL36200
Battery capacity
Li-ion DC 36 V 21 Ah (21000 mAh) 80 cells
Adapter output
Output voltage
DC 36 V
Maximum output current
50 A
USB output terminal
Output voltage
DC 5 V
Maximum output current
0.5 A
Operating temperature range
0°C – 40°C
Adapter cable length
1.5 m
Large-capacity power dimensions
330 mm × 250 mm × 109 mm
Weight
Large-capacity power
6.3 kg
Power adapter
0.5 kg
Carrier
1.0 kg
NOTE
Due to HITACHI’s continuing program of research and development, the speci
fi
cations herein are subject to change
without prior notice.
CHARGING
Charge the back pack power supply before using as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red. (At 1-second intervals)
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. lnsert the adaptor of back pack power supply into
the charger.
Place the back pack power supply in a horizontal
position and turn it on by the switch on the side. Firmly
insert the battery into the charger.
NOTE:
If the pilot lamp of the charger lights in green (high
temperature standby status) when the adaptor is
inserted into the charger, check that the battery status
lamp on the back pack power supply control panel is lit
in red.
If the battery status lamp is OFF, the back pack power
supply switch may be turned OFF.
If the back pack power supply switch is turned OFF,
disconnect the adaptor and turn on the switch before
reinserting the adaptor.
3. Charging
When inserting an adaptor of back pack power supply
in the charger, the pilot lamp will light up continuously
in red.
When the back pack power supply becomes fully
recharged, the pilot lamp will blink in red. (At 1-second
intervals.) (See
Table 2
)
●
Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 2
, according to the condition of the charger or
the back pack power supply.
000Book̲BL36200.indb 5
000Book̲BL36200.indb 5
2014/09/10 10:14:53
2014/09/10 10:14:53
