Hioki FT4310, Instruction Manual, Page: 43 / 72

39
Making Measurements in BPD TEST Mode
Lock Function
This function is used to avoid applying a measuring signal to
equipment. This function will prevent the test from starting even
if the rotary switch is set in BPD TEST and the MEASURE key is
pressed.
Canceling the lock function
Flashes
1
1
Set the rotary switch in BPD
TEST.
RELEASE key flashes.
Off
2
2
Press .
Pressing this key unlocks the
instrument and switches the
display to the measurement
screen.
The screen is locked 1 minute after the last measurement or
operation again.
1
2
4
5
6
7
Appx.
Index
3