Hioki FT4310, Instruction Manual, Page: 21 / 72

17
Names and Functions of Parts
Display
Open-circuit voltage value (Voc mode, (p. 34)) or bypass route resistance
(R
BPR
)
Open-circuit voltage value (BPD TEST mode) or reference value (REF,
(p. 35))
Applied current value
Short-circuit current value
or comparison difference
(p. 35)
Battery indicator (four levels) (p. 28)
Appears when measured voltage is DC.
Flashes when measured voltage is AC.
Flashes when the measured value is less than the minimum
display value.
Flashes when the measured value is greater than the maximum
display value.
Appears when the measured value is retained. (p. 36)
Appears when BPD TEST is PASS (good). (p. 40)
Appears when the judgment is PASS (good) with comparator
function. (p. 31)
Appears when BPD TEST is FAIL (defective). (p. 40)
Appears when the judgment is FAIL (defective) with comparator
function. (p. 31)
Flashes during measurement in BPD TEST mode.
The auto power save function will activate 30 seconds after this
mark starts flashing. (p. 29)
1
2
3
4
5
6
7
Appx.
Index