Hioki FT4310, Instruction Manual, Page: 19 / 72

15
Names and Functions of Parts
MEASURE key
MEASURE key
states
Raise the key
Press the right of
the key
Retract the key
Description in
this manual
Turn on comparison
display or enable
continuous
measurement.
Press the
MEASURE key.
Release the
MEASURE key.
Changing measurement mode (turning on the power)
Setting the rotary switch in a position other than OFF turns on the power.
Rotary switch
state
Voc mode BPD TEST mode Self-check mode
Description in
this manual
Set the rotary
switch in Voc.
Set the rotary
switch in BPD
TEST.
Set the rotary
switch in SELF
CHECK.
Voc mode: Measures open-circuit voltages. (p. 34)
BPD TEST mode: Measures bypass diodes and bypass diode resistors.
(p. 38)
Turning off the power
Rotary switch
state
Description in
this manual
Set off the rotary
switch in OFF.
1
2
3
4
5
6
7
Appx.
Index