Hioki FT4310, Instruction Manual, Page: 28 / 72

24
Using Model L9788-10 Test Lead with Remote Switch (Red)
2.2 Using Model L9788-10 Test Lead
with Remote Switch (Red)
Pre-measurement Inspection
1 Set the rotary
switch in OFF.
2 Fully insert the plug of L9788-10 into
terminal P(+) of the instrument.
OFF
OK NO
3
Set the rotary switch in SELF CHECK.
4 Press the RELEASE key to cancel the lock function.
5 After [Short the Test Leads] is shown on the display, short
the test lead tips with each other.
6
Press the MEASURE key of the L9788-10.
Verify that the display indicates [PASS] .
Lights up in green
PASS
7
Press .
Check that the L9788-10 tip
lamp lights up.