Hioki 8910, Instruction Manual

Page: 126 / 150

10.2 Using the 8910 with the 8841, 8842 MEMORY HiCORDER
118
Follow the procedure below to receive data.
1.
Connect the 8841, 8842 to the 8910 with the RS-232C cable.
2.
Position the [ ONLINE/OFFLINE ] switch of the 8910 to [ ONLINE ] side.
3.
On the 8910 setting screen of the 8841, 8842, select a block to receive
data, then click [
F4 ] (8910
→
RECORDER function key).
4.
After the self-check function checks connectivity, the 8841, 8842
receives data in follows order:
(1) The registration list (up to 50 items)
(2) Analog CH (12 channels)
(3) Logic CH (24 bits)
The data reception status is indicated in the communication message
display section to the right of the block number indication.
5.
Once data is received, it is displayed on the screen and
communication terminates.
If data reception fails, the communication message display section
indicates "
Cannot connect to 8910 . ".
Receiving data from the 8910
If the error massage
appears
Check the cable for proper connection, and
that the [
ONLINE/OFFLINE ] switch of the
8910 is positioned to [ ONLINE ] side.
The RS-232C parameters are automatically set in the 8841, 8842 at data
reception.
Block no. Communication message display
Click [ F4 ] key.