Hioki 8910, Instruction Manual

Page: 108 / 150

10.1 Using the 8910 with the 8826 MEMORY HiCORDER
100
10.1.4 Setting analog channel output
•The cursor keys can be used to move
the cursor to any item indication except
those in the 8910 CH column.
•The function keys can be used to
change the value of a selected item.
Item Description
Setting
range
1. 8910 CH
Analog output channels (fixed) of the
8910
1 to 12
2. Analog CH
output data
Used to select CAN definition data to
be output from an analog channel of
the 8910. The label name is displayed. OFF,
1 to registered
data count
3. D/A conversion
setting
Used to set whether to perform D/A
conversion based on bipolar (-5 to +5
V) or monopolar (0 to +5 V) inside the
8910. BI
(bipolar)
MONO
(monopolar)
4. 8826 input
channel
Used to set the channel of the 8826 for
receiving data input. This is not a
setting item for the 8910. This
information is required to reflect the
scaling value and signal name on the
8826.
1 to 32
1. 2. 3. 4.
Setting changes made here are not reflected on the 8910 until data
transmission (Section 10.1.7, 104p.) is performed.