Hioki 8910, Instruction Manual

Page: 114 / 150

10.1 Using the 8910 with the 8826 MEMORY HiCORDER
106
Follow the procedure below to send data.
1.
Connect the 8826 to the 8910 with the RS-232C cable.
2.
Position the [ ONLINE/OFFLINE ] switch of the 8910 to [ ONLINE ] side.
3.
On the 8910 setting screen of the 8826, select a block to which to
send data, then click [
F5 ] (RECORDER
→
8910 function key).
4.
After the self-check function checks connectivity, the 8826 sends data
in following order:
(1) The registration list (up to 50 items)
(2) Analog CH (12 channels)
(3) Logic CH (24 bits)
The data send status is indicated in the communication message
display section at the lower left of the screen.
5.
Once the data is transmitted, the communication message display
section is cleared and communication terminates.
If data transmission fails, the communication message display section
indicates " Can not connect. "
.
Sending data to the 8910
Communication message display section
Block No.
If the error massage
appears
Check the cable for proper connection, and
that the [
ONLINE/OFFLINE ] switch of the
8910 is positioned to [ ONLINE ] side.