![Hioki 3532-50 Instruction Manual Download Page 67](http://html1.mh-extra.com/html/hioki/3532-50/3532-50_instruction-manual_2137204067.webp)
53
_____________________________________________________________________________________________
4.7 Open Circuit Compensation
______________________________________________________________________________________________
4.7.2 Setting the Compensation Method
ALL key
Press this key to interrupt setting
and return to the Initial screen.
OFF key
SPOT key
1.
Arrange the test leads as closely as possible to their configuration in which
measurement will be performed, and make sure that the HIGH and LOW
leads are not contacted together.
2.
When the open circuit compensation is performed, execute the guarding
process. (For the guarding process, refer to Section 5.2.)
3.
On the Initial screen, press the
key, and the Menu screen will be
displayed.
4.
Press the
key on the Menu screen, and the Open circuit compensation
screen will be displayed.
5.
The OPEN circuit compensation method can be set to:
:
The compensation values are obtained for all test frequencies.
:
The compensation values are obtained at the set test frequency only.
:
The open circuit compensation data are cleared.