49
_____________________________________________________________________________________________
4.6 Setting the Ranging
______________________________________________________________________________________________
4.6.2 Setting the Ranging
Initial screen
Menu screen
The current test range
is shown in non-
reverse video.
Range keys
HOLD key
AUTO key
Ranging Setting Screen
4.6.3 Setting AUTO Ranging
Ranging setting
screen
NOTE
1.
Press the
key on the Initial screen.
The Menu screen will be displayed.
2.
Press the
key on the Menu screen.
The Ranging setting screen will be displayed.
3.
The ranging setting can be either of the following:
AUTO :
The most suitable test range is set automatically.
HOLD :
The test range is fixed, and may only be altered manually.
1.
Press this key, and the 3532-50 will automatically be set to the most suitable
test range. At this time, the AUTO key and the key corresponding to the
current test range will be shown in non-reverse video.
2.
When the setting has been established as above, press the
key to return
to the Initial screen.
If the 3532-50 unit is being used outside the limits of its specification, the
suitable range may not be set in auto ranging function. In this case, check the
accuracy assured ranges in Section 7.5, "Test Accuracy" and then change the
test conditions.
