16
_____________________________________________________________________________________________
3.3 Basic Measurement
______________________________________________________________________________________________
3.3.2 Setting the Test Parameters to be Displayed (Cs, D)
Before Setting
After Setting
Initial Screen
Parameter Setting Screen
NOTE
Here the first (i.e., the uppermost) parameter key will be set to capacitance
Cs, and the third parameter key will be set to loss
coefficient D.
Setting procedure
1.
In order to change the first parameter displayed
on the Initial screen, press the first (uppermost)
parameter key.
2.
The Parameter setting screen is displayed. (The
test parameter (currently
Z
) to which the pressed
parameter key currently corresponds is shown in
black characters on a white ground, i.e. in non-
reversed video).
Press
on this screen, and the display will
automatically return to displaying the Initial
screen, with capacitance Cs being displayed as
the first parameter.
If you press the
key on this screen without
pressing
,
no new setting is performed, and
the display just returns to displaying the Initial
screen.
Any of the test parameters (
Z
, L, C,
R
, etc.) (up
to a maximum of four) can be set to correspond
to any of the four parameter keys.
