10
_____________________________________________________________________________________________
2.3 Turning the Power On and Off
______________________________________________________________________________________________
Off
On
Brighter
Darker
NOTE
2.3 Turning the Power On and Off
How to turn the power on
1.
Turn on the power switch on the front panel. The Initial screen will be
displayed on the liquid crystal display.
The test conditions will start off the same as they were when last the power
was turned off.
2.
Adjust the contrast knob so as to make the display as easy to see as possible.
3.
Wait for 60 minutes after turning on the power before starting testing, so as
to allow the unit to warm up fully.
How to turn the power off
Turn off the power switch on the front panel. The test conditions will be
preserved.
Even if the power supply is interrupted because of a power failure or the
like, the test conditions (settings) will not be lost; when the power is turned
on again, the unit will return to its state just before the interruption.
