Changing IP address of gateway
74/95
12.2 Example: Changing IP address of gateway with IndraWorks
This section shows how to change the IP network settings of the gateway
by using the IndraWorks
®
ML 14V10 P2 Engineering Tool.
Prerequisites
·
You are connected and logged-in at the Sercos PLC/Master via
IndraWorks.
·
The gateway is connected to the Sercos PLC/Master and is in
communication phase 2 (CP2).
Step-by-step instructions
1. Open parameter editor.
Ø
In the
Project Explorer
, select the gateway then click
parameter
editor symbol in the tool bar:
Figure 37: Open parameter editor
Ê
The parameter editor opens.
SmartWire-DT Gateway | EU5C-SWD-SERCOS
DOC160805UM01EN | Revision 1 | English | 2017-02 | Released | Public
© Hilscher 2017