Device picture, connectors and LEDs
27/95
LED
Color
State
Meaning
APL
Application
status
Number in
picture:
(2)
Duo LED red/green
(green)
On
Communication on Sercos and SmartWire-DT is in cyclic data
exchange and the gateway function is executed.
(green)
Blinking
1 s off,
1 s on
Gateway is initialized, but the communication on Sercos or
SmartWire-DT is not in cyclic data exchange.
(red)
Blinking
1 s off,
1 s on
Gateway is initialized, but the SmartWire-DT configuration is missing
or in error.
(red)
On
Gateway has detected an error during the initialization: Missing
configuration, error in configuration or internal error.
Config.
Configuration
status
Number in
picture:
(3)
Duo LED red/green
(green)
On
The project configuration complies with the target configuration.
Data exchange between gateway and PLC via Sercos is possible.
(green)
Blinking
The project configuration does not comply with the target
configuration, but is compatible with it. Data exchange between
gateway and PLC via Sercos is possible.
(red)
On
The project configuration and the target configuration are not
compatible. Data exchange between gateway and PLC via Sercos
is
not possible
.
(off)
Off
No communication with the Sercos PLC or the gateway does not
have a project configuration.
SWD
SmartWire-DT
status
Number in
picture:
(4)
Duo LED red/green/orange
(orange = red/green at the same time)
(green)
On
The actual configuration complies with the target configuration. Data
exchange between gateway and SmartWire-DT slaves takes place.
(red)
Blinking
The gateway misses its target configuration or a necessary
SmartWire-DT slave is missing or the target configuration does not
comply with the actual configuration.
No data exchange
between gateway and SmartWire-DT slaves.
(green)
Blinking
Slave addressing is active (after power-on or download of a project
configuration containing empty modules).
No data exchange
between gateway and SmartWire-DT slaves.
(red)
On
Short-circuit on the 15 V power supply or no SmartWire-DT slave is
connected.
No data exchange
between gateway and SmartWire-DT slaves.
(orange)
Blinking
After having pressed the configuration button: The gateway reads
the actual configuration and stores it as target configuration.
Table 13: Description of the Gateway function LEDs
SmartWire-DT Gateway | EU5C-SWD-SERCOS
DOC160805UM01EN | Revision 1 | English | 2017-02 | Released | Public
© Hilscher 2017
