Parameterization
49/95
9
Parameterization
9.1
Configuring EU5C-SWD-SERCOS gateway as SmartWire-DT
Coordinator
Being the master device in the SmartWire-DT network, the EU5C-SWD-
SERCOS gateway serves as a so-called “Coordinator” controlling the data
transfer procedure within the SmartWire-DT network in accordance with the
SmartWire-DT protocol. Via the Coordinator, you can configure the
following properties:
·
the Baud rate of the SmartWire-DT network (
Baudrate
)
·
the handling of failing SmartWire-DT devices (
All Modules Optional
)
·
the handling of the replacement of SmartWire-DT devices during bus
operation (
Replace Mode
)
To configure the Coordinator parameters in IndraWorks
®
proceed as
follows:
Ø
In the
Project Explorer
double-click
EU5C_SWD_SERCOS_1 (EU5C-
SWD-SERCOS)
object.
Figure 17: Configuring Coordinator parameters
Ê
In the workspace area (middle of the window), the editor for the Sercos
module opens.
Ø
Select
User Parameter
tab.
SmartWire-DT Gateway | EU5C-SWD-SERCOS
DOC160805UM01EN | Revision 1 | English | 2017-02 | Released | Public
© Hilscher 2017
