Hill-Rom 20090059 Assembly Instruction Manual Download Page 5

Page: 5 / 60

www.liko.com

Golvo

™

Base Motor Cover, grey

Motorkåpa underrede, grå

Assembly Instruction

Monteringsanvisning

Prod. No. 20090065

3SE630270-02

2010-05-10

Tools required

www.liko.com

Contains:

Qty:

Motor cover chassi G7-77

Cable grommet/holder

Screw MRX M5x90

Washer BRB 5.3x10x1

Fits:

Golvo 7000 ES fr. S/N 7024206

Golvo 7007 ES fr. S/N 7729722

Golvo 7007 Lowbase

Golvo 7000 ES Classic / 7007 ES Classic

Golvo 8000/8008 (all models)

NOTE

- Make sure the spare part is mounted according to the assembly instruction.

- Check all functions related to the changed spare part.

- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.

5.280

Remove cable from the old cover. Mount the cable

and the new cover together with the plastic bushing.

5.280

Summary of Contents for 20090059





























































Search results

Summary of Contents for 20090059

Reviews:

Brands by name

Popular brands

Hill-Rom 20090059, Assembly Instruction Manual

Search results

Summary of Contents for 20090059

Reviews:

Brands by name

Popular brands