
Periodic Inspection
www.liko.com
98
6.0
Golvo
™
Instructions for the check points
1 Type/model identification decal.
- Verify presence of mast decal with model type and serial number.
2
Inspection of the lift.
- Check for scratches, dents, deformities or unusual surface wear.
3 Castor wheels and forks.
- Roll the lift, unloaded, along the floor, checking to ensure that all castors roll and turn freely.
- Verify that the castor fasteners are tight. There should not be any play between the fork and the castor nut.
4 Castor brakes.
- Lock the brakes. Make sure the wheels do not turn and the castor housing does not swivel when the lift is
pushed.
5 Inspect the stop screw.
- Verify that the K6S M8x16 stop screw is secured with a nyloc nut inside the middle beam.
6 Base opening and closing
- Inspect telescoping insert beam for scratches/gouges
- Inspect that all hardware is tight.
- Verify max. & min. dimensions, according to the Service manual
- The distance A & B must be the same.
- The cover profiles (C) must be fixed to the middle beam (D).
7 Base attachment secure screws.
- Verify that both locking screws are tight in base. In the upper holes on the mast.
-
Note! Do not place any screws in the lower holes!
8 Armrest
- Verify that both arms rotate freely and hang vertically when not in use. (Not Golvo Classic)
- Rotate arms to raised position. (Not Golvo Classic)
- Rotate arms to raised position, load the armrest with (40 kg/88 lbs). (Not Golvo Classic)
9 Lift arm hardware and covers.
- Inspect plastic lift arm cover for cracks and verify edges of cover are secured in groove of aluminium arm.
- Inspect sling size label is positioned above the Emergency lowering handle.
10 Lift strap.
- Using the hand control, lower the strap to its maximum extension. Inspect the belt for frayed edges, heavy
wrinkles or wear through areas.
- Verify Q-link is secure on strap. Slide plastic cover off the Q-link and visually inspect that the lift strap safety pin
is seated secure in the middle recess of the Q-link.
10
3
4
9
11
8
14
13
12
1
19
5
6
15
16
7
B
A
C
C
D
Summary of Contents for 20090059
Page 36: ...96 www liko com Golvo ...
Page 40: ......
Page 59: ...119 www liko com ...
Page 60: ...Manufacturer Liko AB SE 975 92 Luleå Sweden www liko com Copyright Liko AB 2014 May ...