Hill-Rom 20090059 Assembly Instruction Manual Download Page 28

Page: 28 / 60

www.liko.com

Golvo

™

Lift strap Cover Strip

Täckskiva grå

Assembly Instruction

Monteringsanvisning

Prod. No. 20090085, 20090087

3SE690212-01

2011-09-26

Tools required

20090085 Lift strap Cover Strip, 7007/8008

Contains:

Qty:

Lift strap Cover Strip, Golvo

Fits:

Golvo 7007

Golvo 8008

20090087 Lift strap Cover Strip, 7000/8000

Contains:

Qty:

Lift strap Cover Strip, G

Fits:

Golvo 7000

Golvo 8000

NOTE

- Make sure the spare part is mounted according to the assembly instruction.

- Check all functions related to the changed spare part.

- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.

www.liko.com

Slide the Lift strap Cover strip in the

groove of the mast.

Assemble the side with the rough

structure facing out.

3 mm

5.492

Summary of Contents for 20090059





























































Search results

Summary of Contents for 20090059

Reviews:

Brands by name

Popular brands

Hill-Rom 20090059, Assembly Instruction Manual

Search results

Summary of Contents for 20090059

Reviews:

Brands by name

Popular brands