Hill-Rom 20090059 Assembly Instruction Manual Download Page 23

Page: 23 / 60

www.liko.com

Golvo

™

www.liko.com

Adapter Golvo (for Scale)

Ledadapter Golvo (för våg)

Assembly Instruction

Monteringsanvisning

Prod. No. 2006010

3SE650244-02

2010-05-11

Contains:

Qty:

Adapter

Locking nut M10

Screw K6S M10x25/15

Fits:

Golvo all models

Uno with S/N from 31825

Viking all models

LikoLight

Combine only with:

LikoScale all models

Tools required

Nödvändiga verktyg

6 mm

17 mm

1 x

10 mm

2 x

17 mm

2 x

Golvo

Uno, Viking, LikoLight

WARNING

Never mount the adapter

directly on the slingbar.

NOTE

- Make sure the spare part is mounted according to the assembly instruction.

- Check all functions related to the changed spare part.

- Repairs and maintenance may only be performed by personnel authorized by Liko/Hill-Rom and using original Liko spare parts.

5.419

Summary of Contents for 20090059





























































Search results

Summary of Contents for 20090059

Reviews:

Brands by name

Popular brands

Hill-Rom 20090059, Assembly Instruction Manual

Search results

Summary of Contents for 20090059

Reviews:

Brands by name

Popular brands