Hill-Rom 20090059, Assembly Instruction Manual

Page: 21 / 60

81 www.liko.com
Golvo
™
Friction plates 2.8-3.4 mm
Glidplattor 2.8-3.4 mm
Assembly Instruction
Monteringsanvisning
Prod. No. 20090072
5.404
NOTE
- The actuator must be tested by lifting maximum load all the way up to the highest position/through the entire lifting range.
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.
When changing Spare part 20090038 Gear Rack set , replace-
ment of Friction plates may be needed. Use the same dimension
as original or as instructions below.
(Use glue)
Short side in all Friction plates
facing the end of the beam.
Pos. Name: Pce.
1 Friction plate 2.8 mm 2
2 Friction plate 3.2 mm 2
3 Friction plate 3.0 mm 2
1
2
2
3
78
7007
80
82
84
86
88
90
92
94
96
98
100
102
104
76
1
3
2
2
Pos. Name: Pce.
4 Friction plate 3.0 mm 4
5 Friction plate 3.2 mm 4
6 Friction plate 3.4 mm 4
4
5
6