manualshive.com logo in svg

Hill-Rom 20090059, Assembly Instruction Manual

Share
Download
Hill-Rom 20090059 Assembly Instruction Manual Download Page 1

 61 

www.liko.com

  

Golvo

™

 

Motor for Base width Adjustment Golvo, grey

Motorpaket komplett Golvo, grå

Assembly Instruction

Monteringsanvisning

Prod. No. 20090059 

3SE630216-05

2014-02-18

© Copyright Liko AB 

www.liko.com

Tools required:

5.274

2,5 mm 

4 mm

Contains:  

Qty:

Motor for Base with Adjustment 

1

Motor cable Mini Fit (for Golvo 8000/8008)  1

Fits: 

Golvo 7000/7007 (all models)

Golvo 8000/8008 (all models)

B

A

C

C

D

After mounting: The distance A & B must be the same. 

Note! The cover profiles (C) must be fixed to the 

 

middle beam (D).

Assemble the Motor in reverse order.

Connect the 

cable for base motor to socket number 3.

Adjust the width almost to the outer position.

Disconnect the motor cable from the control box

Golvo 7000/7007 (all models):

5. 

 6. 

2. 

1. 

3. 

4. 

 

 NOTE

 

  -  Make sure the spare part is mounted according to the assembly instruction. 

  -  Check all functions related to the changed spare part. 

  -  Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.

Summary of Contents for 20090059





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands