HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 83 / 90

Network Camera User Manual
UM Network Camera 072221NA 83
red frame. Only the position of the red frame is adjustable.
NOTE:
Only one license plate can be captured at one time for each lane.
6. Select Region and Country/Region .
7. Check
Remove Duplicated License Plates
and set
Time Interval
. The default time interval is four
minutes.
NOTE:
Up to eight license plates are supported.
8. Set arming schedule and linkage method. For arming schedule settings, refer to
Set Arming Schedule.
For linkage method settings, refer to
Linkage Method Settings.
9. Click Save .
Uploading Pictures Settings
You can set the image parameters of the captured images in vehicle detection and mixed-traffic detection.
Go to VCA → Road Traffic → Picture .
• Picture Quality
: The larger the value, the clearer the picture, but larger storage space is also required.
• Picture Size
: The larger the value, the larger the storage space needed, and the level of network
transmission requirement is also higher.
• License Plate Enhancement
: The larger the value, the clearer the license plate, but larger storage
space is also required. Check License Plate Enhancement and set the level. The default level is 50.
NOTE:
Only certain device models support this function.
• Overlay : You can overlay camera, device, or vehicle information on the captured image and click
to adjust the order of overlay texts.
Import or Export Blocklist & Allowlist
You can import and export the blocklist and allowlist as desired, and check the list content in this
interface.
Steps
1. Click Browse to open the PC local directory.
2. Find the blocklist & allowlist file and click to select it. Click
Open
to confirm.
NOTE: The file to import should correspond with the file template that is required by the
camera. You are recommended to export an empty blocklist & allowlist file from the
camera as the template and fill in the content.
The file should be in.xls format and the cell format should be “text.”
3. Click
Import
to import the selected file.
4. Click Export to open the PC local directory.