HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 41 / 90

Network Camera User Manual
UM Network Camera 072221NA 41
day mode during the set periods and switches to night mode during the other periods.
•
Sensitivity
: The higher the sensitivity value, the more sensitive the motion detection. If scheduled
image settings is enabled, the sensitivity of day and night can be set separately.
3. Select an
Area
and click
Draw Area
. Click and drag the mouse on the live image and then release the
mouse to finish drawing one area.
Figure 1, Set Rules
• Stop Drawing : Finish drawing one area.
•
Clear All
: Delete all the areas.
4. Click Save .
5. Optional
:
Repeat above steps to set multiple areas.
Normal Mode
You can set motion detection parameters according to the device default parameters.
Steps
1. Select normal mode in
Configuration
.
2. Set the sensitivity of normal mode. The higher the sensitivity value, the more sensitive the motion
detection. If the sensitivity is set to
0
, motion detection and dynamic analysis do not take effect.
3. Set Detection Target . Human and vehicle are available. If the detection target is not selected, all the
detected targets will be reported, including humans and vehicles.
4. Click Draw Area . Click and drag the mouse on the live video, and then release the mouse to finish
drawing one area.
•
Stop Drawing
: Stop drawing one area.