Network Camera User Manual
UM Network Camera 072221NA
53
Multicast
Multicast data transmission is addressed to a group of destination devices simultaneously. After setting
multicast, you can send the source data efficiently to multiple receivers.
Go to
Configuration
→
Network
→
Basic Settings
→
Multicast
for the multicast settings.
•
IP Address:
It stands for the address of multicast host.
•
Stream Type:
The stream type of the multicast source.
•
Video Port:
The video port of the selected stream.
•
Audio Port:
The audio port of the selected stream.
•
FEC Port:
The FEC port of the selected stream.
•
FEC Ratio:
The ratio of forward error correction.
Multicast Discovery
Check the
Enable Multicast Discovery
, and then the online network camera can be automatically detected
by client software via private multicast protocol in the LAN.
7.2
SNMP
You can set the SNMP network management protocol to get the alarm event and exception messages in
network transmission.
Before You Start
Before setting the SNMP, download the SNMP software and manage to receive the device information via
the SNMP port.
Steps
1.
Go to the settings page:
Configuration
→
Network
→
Advanced Settings
→
SNMP
.
2.
Check
Enable SNMPv1
,
Enable SNMP v2c
, or
Enable SNMPv3
.
The SNMP version you select should be the same as that of the SNMP software.
NOTE:
You must use the version based on the security level required. SNMP v1 is not secure
and SNMP v2 requires password for access. SNMP v3 provides encryption and HTTPS
protocol must be enabled.
3.
Configure the SNMP settings.
4.
Click
Save
.
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......