Network Camera User Manual
UM Network Camera 072221NA
55
Set Manual Port Mapping
Steps
1.
Check
Enable UPnP
™
, and choose a friendly name for the device, or use the default name.
2.
Set the port mapping mode to
Manual
, and set the external port to be the same as the internal port.
3.
Click
Save
.
What To Do Next
Go to the router port mapping settings interface and set the port number and IP address to be the same as
those on the device. For more information, refer to the router user manual.
Set Port Mapping on Router
The following settings are for a specific router. The settings vary depending by router.
Steps
1.
Select the
WAN Connection Type
.
2.
Set the
IP Address
,
Subnet Mask
,
and other network parameters of the router.
3.
Go to
Forwarding
→
Virtual Severs
, and input the
Port Number
and
IP Address
.
4.
Click
Save
.
EXAMPLE:
When the cameras are connected to the same router, you can configure the ports of
a camera as 80, 8000, and 554 with IP address 192.168.1.23, and the ports of another
camera as 81, 8001, and 555 with IP address 192.168.1.24.
Figure 7, Port Mapping on Router
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......