Network Camera User Manual
UM Network Camera 072221NA
73
4.
Click
Save
.
Set DST
If the region where the device is located adopts Daylight Saving Time (DST), set this function.
Steps
1.
Go to
Configuration
→
System
→
System Settings
→
DST
.
2.
Check
Enable DST
.
3.
Select
Start Time
,
End Time
, and
DST Bias
.
4.
Click
Save
.
9.14
Set RS-485
RS-485 is used to connect the device to an external device. You can use RS-485 to transmit the data
between the device and the computer or terminal when the communication distance is too long.
Before You Start
Connect the device and computer or terminal with an RS-485 cable.
Steps
1.
Go to
Configuration
→
System
→
System Settings
→
RS-485
.
2.
Set the RS-485 parameters.
NOTE:
Keep the parameters of the device and the computer or terminal the same.
3.
Click
Save
.
9.15
Set RS-232
RS-232 can be used to debug a device or access a peripheral device. RS-232 can realize communication
between the device and computer or terminal when the communication distance is short.
Before You Start
Connect the device to computer or terminal with an RS-232 cable.
Steps
1.
Go to Configuration
→
System
→
System Settings
→
RS-232.
2.
Set RS-232 parameters to match the device with the computer or terminal.
3.
Click
Save
.
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......