HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 76 / 90

Network Camera User Manual
UM Network Camera 072221NA 76
Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identity authentication, which
improves the security of remote access.
Steps
1. Go to
Configuration → Network → Advanced Settings → HTTPS
.
2. Check Enable to access the camera via HTTP or HTTPS protocol.
3. Check Enable HTTPS Browsing to access the camera only via HTTPS protocol.
4. Select the
Server Certificate
.
5. Click Save .
NOTE:
If the function is abnormal, check if the selected certificate is abnormal in
Certificate
Management .
Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by setting the data
sending priority.
NOTE: QoS needs support from the network devices such as the router and switch.
Steps
1. Go to Configuration → Network → Advanced Configuration → QoS .
2. Set Video/Audio DSCP , Alarm DSCP , and Management DSCP .
NOTE:
The network can identify the data transmission priority. The bigger the DSCP value,
the higher the priority. Set the same value in the router while configuring.
3. Click
Save
.
Set IEEE 802.1x
IEEE 802.1x is port-based network access control. It enhances the security level of the LAN/ WLAN. When
devices connect to the network with the IEEE 802.1x standard, authentication is needed.
Go to
Configuration → Network → Advanced Settings → 802.1x
and enable the function.
Set Protocol and EAPOL Version according to router information.
• Protocol : EAP-LEAP, EAP-TLS, and EAP-MD5 are selectable
• EAP-LEAP and EAP-MD5
: If you use EAP-LEAP or EAP-MD5, the authentication server must be
configured. Register a user name and password for 802.1x in the server in advance. Input the user
name and password for authentication.