HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 43 / 90

Network Camera User Manual
UM Network Camera 072221NA 43
linkage method.
6. Click
Save
.
Set Exception Alarm
Exceptions such as network disconnection can trigger the device to take a corresponding action.
Steps
1. Go to Configuration → Event → Basic Event → Exception .
2. Select Exception Type .
•
HDD Full
: The HDD storage is full.
• HDD Error : Error in the HDD.
•
Network Disconnected
: The device is offline.
• IP Address Conflicted : The IP address of current device is same as that of another device in the
network.
•
Illegal Login
: Incorrect user name or password entered.
3. Refer to
Linkage Method Settings for setting linkage method.
4. Click
Save
.
Set Alarm Input
Alarm signal from an external device triggers corresponding actions of the current device.
Before You Start
This function is supported only by certain models.
Make sure the external alarm device is connected. See
Quick Start Guide for cable connection.
Steps
1. Go to
Configuration → Event → Basic Event → Alarm Input
.
2. Check
Enable Alarm Input Handling
.
3. Select Alarm Input No. and Alarm Type from the drop-down list. Edit the Alarm Name .
4. Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method Settings
for setting
linkage method.
5. Click Copy to... to copy the settings to other alarm input channels.
6. Click Save .