HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 42 / 90

Network Camera User Manual
UM Network Camera 072221NA 42
• Clear All : Clear all the areas.
5. Optional
:
You can set the parameters of multiple areas by repeating the above steps.
Set Video Tampering Alarm
When the configured area is covered and cannot be monitored normally, the alarm is triggered and the
device takes certain alarm response actions.
Steps
1. Go to Configuration
→
Event
→
Basic Event
→
Video Tampering .
2. Check
Enable
.
3. Set the Sensitivity . The higher the value, the easier to detect the area covering.
4. Click
Draw Area
and drag the mouse in the live view to draw the area.
• Stop Drawing : Finish drawing.
•
Clear All
: Delete all the drawn areas.
Figure 2, Set Video Tampering Area
5. Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method Settings
for setting