Network Camera User Manual
UM Network Camera 072221NA
74
9.16
External Device
For devices supporting external devices, including a supplement light, housing wiper, and LED light, you
can control them via a Web browser when it is used with the housing.
External devices vary by model.
•
Brightness
: Adjust Low Beam Brightness and High Beam Brightness according to the actual scene.
•
Timing
: The LED light will be turned on by the schedule you set. You should set
Start Time
and
End Time
.
•
Auto
: The LED light will be turned on according to the environment illumination.
Supplement Light Settings
You can set the supplement light and refer to the actual device for relevant parameters.
•
Smart Supplement Light
: Smart supplement light avoids overexposure when the supplement light is on.
•
Supplement Light Mode
: If the device supports a supplement light, you can select supplement light
mode.
•
IR Mode
: IR light is enabled.
•
White Light Mode
: White light is enabled.
•
Mix Mode
: Both IR light and white light are enabled.
•
Off
: Supplement light is disabled.
•
Brightness Adjustment Mode
Auto
: The brightness adjusts according to the actual environment automatically.
Manual
: You can drag the slider or set value to adjust the brightness.
Heater
You can enable the heater to remove fog around the device lens.
Go to
Configuration
→
System
→
System Settings
→
External Device
and select the mode as desired.
9.17
Security
You can improve system security by setting security parameters.
Authentication
You can improve network access security by setting RTSP and Web authentication.
Go to
Configuration
→
System
→
Security
→
Authentication
to choose the authentication protocol and
method according to your needs.
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......