HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 44 / 90

Network Camera User Manual
UM Network Camera 072221NA 44
Set Video Quality Diagnosis
When the video quality of the device is abnormal and the alarm linkage is set, the alarm will be triggered
automatically.
Steps
1. Go to
Configuration → Event → Basic Event → Video Quality Diagnosis
.
2. Select Diagnosis Type .
3. Set the corresponding parameters.
•
Alarm Detection Interval
: The time interval to detect the exception.
• Sensitivity : The higher the value, the more easily the exception will be detected, and the higher the
possibility of misinformation.
• Alarm Delay Times : The device uploads the alarm when the alarm reaches the set number.
4. Check
Enable
, and the selected diagnosis type will be detected.
5. Set arming schedule. See
Set Arming Schedule.
6. Set linkage method. See
Linkage Method Settings.
7. Click
Save
.
The function is only supported by certain models. The actual display varies with models.
Set Vibration Detection
Detects if the device is vibrating. The device reports an alarm and triggers linkage actions if the function is
enabled.
Steps
1. Go to
Configuration → Event → Basic Event → Vibration Detection
.
2. Check Enable .
3. Drag the slider to set the detection sensitivity. You can also enter a number to set the sensitivity.
4. Set the arming schedule. See
Set Arming Schedule.
5. Set the linkage method. See
Linkage Method Settings.
6. Click
Save
.
NOTE: The function is supported only by certain models. The actual display varies by model.